APPLICATIONS
Comprehensive Technical Information and Documents About the Product
Environmental Management System
Information Security Management System
Occupational Health and Safety Management System
Quality Management System
Luminaires for Road and Street Lighting
European Conformity
LED Lifespan Test
Photometric Measurement Standard
LED Lifespan Estimation
HR Impact Resistance
IP Protection Classes
90–305 Vac
Class I
> 0,95
L70 > 102.000 hours @ Tc 105 °C
120.000 hours @ Tc 70 °C
50 / 60 Hz
< %10
10 kV
-40 °C … +50 °C
LM-79, LM-80, TM-21, EN 62262, EN 60529, EN 13032, EN 60598-2-3
Power LED
> 70
SDCM ≤ 5
RG2
2700 / 3000 / 4000 / 5000 / 5700 / 6500K
Type II / Type III / Type IV / Type V
White UV-Stabilized PC
Die-Cast Aluminum
RAL 7016
Each product is packaged in a single box.
Suitable lifting equipment must be used.
Mounting bracket and screws are included with the product.
cd/klmLight intensity per 1000 lumens.
Gamma AngleAngle at which luminous intensity is measured relative to the luminaire's vertical axis.
Lens SelectionThe lens should be selected according to the application area, mounting height, and required light distribution.
Applies a pre-programmed automatic dimming profile based on the nighttime period.
Enables light level adjustment via an analog control signal.
DALI-2 based control and data interface supporting energy, luminaire and diagnostics data for smart luminaires.
Enables dimming and centralized control via Digital Addressable Lighting Interface.
Automatically switches the luminaire on or off according to the ambient light level. Can be integrated into the luminaire via a NEMA socket connection.
Electrical protection class incorporating protective earthing.
Enables compatible sensor and communication modules to be connected via a Zhaga interface.
Enables easy connection of compatible sensors and communication modules via a NEMA-compatible socket.
See all technical specifications, photometric data, and documents.
Sign up for free or log in to your account to access them.
The IP rating indicates the luminaire's level of protection against solid objects and water. For example, IP66 means that the product is fully protected against dust and resistant to powerful water jets.
The IK rating indicates the luminaire's resistance to external mechanical impacts. A higher IK rating represents a higher level of impact resistance.
LED lifetime indicates how long the LEDs can maintain a specified level of luminous flux under defined operating conditions. Values such as L80 or L90 indicate how much of the initial luminous flux is maintained after the specified operating period.
The lens angle determines how widely the light is distributed from the luminaire. Narrow beam angles concentrate the light over a smaller area, while wider angles distribute it over a larger area.
The appropriate beam angle should be selected according to the mounting height, pole spacing, dimensions of the area and required illumination level. A lighting calculation is recommended for the most suitable selection.
DALI is a digital lighting control system used to control compatible luminaires. Depending on the system, it enables functions such as switching, dimming and lighting automation.
1-10V dimming is an analog control method that allows the light level of a compatible LED driver to be adjusted using an external control signal.
An internal surge protector helps protect the electronic components of the luminaire against transient overvoltage surges that may occur in the electrical network.
Outdoor suitability depends on the product's IP rating, operating temperature, mechanical construction and specified operating conditions. The application areas stated in the product specifications should be considered.
Products designed for outdoor use can be operated outdoors within their specified IP rating and operating conditions. Proper installation and protection of cable entries are important for maintaining the intended protection level.
Our technical team is ready to provide the most suitable solution for your project.
Contact UsOther LED Lighting Solutions That May Suit Your Needs
SANTIAGO M DURO PLUS is a professional LED floodlight designed for outdoor applications requiring high mechanical resistance. With IK10 impact resistance, a robust housing structure and high-performance LED technology, it provides reliable and long-lasting illumination for industrial areas, sports facilities, car parks and large outdoor spaces.
**Luminaire Features** Housing: Die-Cast Aluminum Coating: Electrostatic Powder Coating Gasket: EPDM & Extruded Silicone LED: High-Power LED with L70 > 100,000 Hours Lifetime Optics: High-Transmittance Glass & Lens PCB: High Thermal Conductivity PCB Driver: High-Efficiency, ns with the desired color temperature (CCT). Electrostatic powder coating in various RAL colors. DimminENEC-Certified Driver Options: LED applicatiog options such as 1–10 V, DALI, AstroDIM, Constant Lumen Function, etc. The Ø42 mm bracket connection adapter is optional and must be specified separately when placing the order.
Why Should You Register?